Add
The two billet end caps and 60 PSI gauges from our full Charge Air Cooler tester, without the extension hose and regulator. A good fit if you already have a regulated air line and shut-off valve in your shop.
The end caps slide into the flexible hoses on each side of the charge air cooler to isolate it for a pressure test up to 60 PSI. Each cap steps 4", 3.5" and 3", and the machined slots and beaded edge on each step grip the hose so the cap doesn't slip, even at higher pressure on the 4" step. With a gauge on each end, you can see pressure on both sides of the cooler at once and watch whether it holds.
Not included: extension hose, shut-off valve, pressure regulator or T-bolt clamps. Always regulate shop air down before testing. Need those parts? Get the full CAC kit, or add the 5 ft extension hose kit with 150 PSI regulator.
A leaking charge air cooler costs power, towing and fuel economy, and makes the turbo overspin to make up for lost boost. It's also good practice to pressure test a new CAC before install, so you don't have to pull it back out.
Free shipping on orders over $50. Ships same day when ordered before 5pm PST Mon–Fri or 2pm Sat. Lifetime warranty, with tech help by text at 248-403-8512.