6" Turbo Boost Leak Tester Kit - Billet 6061 Aluminum - Large Frame & Diesel - with 5 Ft Extension Hose & 150 PSI Regulator

Fix Boost Leaks and RESTORE TORQUE & FUEL ECONOMY!

This high quality boost leak tester is designed to perform a boost leak test for your turbocharged engine, and now includes the 5 ft extension hose kit with shut-off valve and 150 PSI air regulator for precise control over your shop air.

This is an important tool that every turbo car owner needs in their arsenal of tools. It is going to keep the turbo healthy by eliminating leaks in the boost path. It is a must if you are tuned and/or going to get a custom tune, or any time you are replacing any components in the intake tract such as charge hoses, intercooler, manifold, vacuum lines, injectors...etc. Also a must if you are going to the track and want the peace of mind that everything is tight and capable of handling sustained boost without blowing any hoses off.

Why add the extension hose kit?

This will allow you to have precise control over the pressure entering into your turbo system. Almost mandatory for use in any shop environment where the preset shop air is too high for a boost leak test and needs to be regulated down.

The 5 ft extension hose allows you to stand free and clear from the tester (in case it pops off) and allows you to comfortably regulate the pressure as needed. The ball valve lets you turn the pressure into the system on and off - this can be very important for you to check the decay or bleed rate after filling the system with pressure. The bleed rate lets you know how well the system holds, and this can only be done by cutting off the pressure to the tester.

Design Features & What's Included:

• (1) Billet 6061 Aluminum End Cap with 1/8" NPT threaded gauge port & fitting
• (1) High quality 4-layer silicone coupler, 4" to 6"
• (1) Custom Stainless Steel 15 PSI / 1 Bar Boost Gauge - the 15 PSI range will give you the appropriate reading when testing your charge pipes for low, medium or high boost levels
• Universal Tire Schrader Valve and 1/4" NPT M-Type compressor fitting
• (2) Stainless Steel T-bolt Clamps with Teflon lock-nut, 4" and 6"
• (1) 5 ft. Continental extension hose with stainless on/off valve for easy control - All 1/4" NPT Fittings M-Type
• (1) 150 PSI Air Regulator with 150 PSI gauge for added safety and control for shop air - aluminum housing
• Self purging regulator when turning the pressure down
• Stainless steel ball valve housing

Lifetime warranty on every component.

Not sure what size you need? See our What Size Do I Need? size chart, or text a photo of your turbo inlet with a tape measure across it to 248-403-8512 and we'll tell you the size.