3" Universal Turbo Boost Leak Tester - Billet Aluminum - Find P0299 Boost Leaks

Get your boost back!  

This boost leak tester is designed to fit over the inlet flange of your turbocharger and allows you to pressurize the turbo and charge system with compressed air while the vehicle is off. 

This is an important tool that every turbo car owner needs in their arsenal of tools.  It is going to keep the turbo healthy by eliminating leaks in the boost path and not allowing it to overspeed compensating for a boost leak.   It is a must if you are tuned and/or going to get a custom tune, or any time you are replacing any components in the intake tract such as charge hoses, intercooler, manifold, vacuum lines, injectors…etc.  Also a must if you are going to the track and want the peace of mind that everything is tight and capable of handling sustained boost without blowing any hoses off

Design Features:

• 6061 Billet End Cap 2" O.D. with 1/8" NPT gauge port & 1/4" NPT fitting port for use with either tire or compressor fitting
• High quality silicone coupler
• 30 PSI Boost Gauge
• 30 PSI range will give you the appropriate reading when testing your charge pipes for low, medium or high boost levels.
• Universal Tire Schrader Valve & 1/4" Compressor Fitting (M-type)
• (2) Stainless Steel T-bolt Clamps

Not sure what size you need? See our What Size Do I Need? size chart, or text a photo of your turbo inlet with a tape measure across it to 248-403-8512 and we'll tell you the size.

Lifetime warranty on every component. Designed and engineered in the USA.

Helpful guide: P0299 code: causes, symptoms and how to fix it