This extension hose kit is the perfect add-on to any boost leak tester that uses the compressor fitting (not compatible with the tire schrader valve) This will allow you to have control over shop air and manage the pressure entering into your turbo system. Almost mandatory for use in any shop environment where the preset shop air is too high for a boost leak test and needs to be controlled down to a lower pressure
The 3 ft extension hose allows you to stand free and clear from the tester (in case it pops off) and allows you to comfortably regulate the pressure as needed when accessing harder to reach areas.
The ball valve lets you turn on and off the pressure into the system - this can be very important for you to check the decay or bleed rate after filling the system with pressure. The bleed rate lets you know how well the system holds and this can only be done by cutting off the pressure to the tester.
Design Features & What's Included:
- (1) 3 ft. extension hose with stainless on/off valve for easy control
- All 1/4" NPT Fittings M-Type
- stainless steel ball valve housing
If you have ANY questions feel free to reach out - 248-403-8512 cell/text/media 24/7