Loading... Please wait...
  • Image 1

ALL SIZES - Universal Shop Boost Leak Tester Kit - Includes sizes 2 inch to 4 inch


Product Description

This Shop Kit will give you the flexibility to test almost any make and model vehicle with stock and aftermarket turbos from 2 inch up to 4 inch.

It includes:

- (3) end caps (one 2 inch, 2.25" and one 2.75 inch) with compressor fittings and 30 psi gauges

- Silicon coupler adapters to allow you to test 2 inch, 2.25 inch, 2.5 inch, 2.5 inch, 2.75 inch, 3 inch, 3.25 inch, 3.5" and 4"

- Stainless T-bolt clamps on every size

- (2) extra gauges (30 psi)

- (1) plug for 1.8T applications,

- Assorted sizes of vinyl caps to block off crank breather lines and intake lines.  Common for BMW 3.0L N54, Audi 2.7T, VW 1.9T TDI to name a few.


*Note that you will need to regulate your shop air compressor since typical shop air settings are usually high ~90 psi and meant for air tools.  This line pressure for a boost leak test needs to be regulated down for the boost leak test or you may risk over-pressurizing intake and charge pipes, as well as, risk of blowing off the boost leak tester.  By purchasing this kit, you acknowledge that you are fully aware how to safely perform a boost leak test, both for personal safety and engine safety.



Calculated at checkout